Purchasing information for Azerbaijani customers
Our company supplies products to customers in the construction, gas and oil industries, located both in Baku and in Tbilisi. Please, provide CIP Tbilisi price for below product.
1. Water pump – 1 pc;
Three-phase engine for aeration system (fountain);
Submersible pump to clean water pump,
can be installed in both vertical
and horizontal position;
Pump component made of stainless
steel, EN 1. 4301 (AISI 304);
The engine is built-in temperature sensor,
which is 4-20 MA IP68 konventoris through
and underwater cable ukavshrdeba temperature
monitoring electronic unit, which is
at the management and control of the closet in
the pump data:
pumping liquids: water
fluid Maximum temperature: 40 degrees C
Bruni: 2890-2910 RPM (brn Minutes)
Flow rate: Not less than 160 M3 / h (kb / h)
Water rise height: Not less than 85M (m).
Must meet: ISO09906: 2012 3B Standard.
output khrakhnilis Size: RP6
pump Material: Stainless steel EN 1.4301 / AISI 304
prtovani eye Material: Stainless steel EN 1.4301 / AISI
electric engine:
Engine version: T45
startup method: DOL (engine designed for online operation)
Power: no more than 55KWT (kW)
Frequency : 50 HZ
Voltage: 3 X 380-415 V Brand
: 2890-2910 RPM (min min)
Sensor Type: PT100 Shutter
Insulator Type: SIC / SIC
Engine Materials: Stainless Steel Found DIN W.-Nr 1.4031 / AISI 304
Body Class: (IEC 34-5): IP68
Electric Engine Diameter: Not less than 20cm and not more than 22cm
Shenlong often provide pumps for fountain projects in China and oversea.
According to Azerbaijani customer’s request, we recommend submersible fountain pump.
Please note that we recommend using 63kw motor. Because when the pump meets the requirement of flow rate and head, the pump shaft power will be 49kw and 55kw motor is not enough. When the pump is working, the motor is easy to overload and burn out.
At the same time, we discussed with engineer, the pump startup method should not be DOL when the motor power is over 45kw. Otherwise, the motor life will be shorted. We suggest you using soft start or variable frequency start. It will be safer and more reliable.
Please discuss with your customer and kindly let us know the feedback from the customers. Then we could update and provide you pump technical specification.
The customer chose the solution recommended by our engineer
| Model | Flow rate | Head | Power | Power supply | Pump max. outer diameter | Material | RPM | Outlet diameter |
| 250QJH160-85 | 160 m3/h | 85m | 63 kw | 3phase, 380V, 50Hz | 233mm | SS304 pump casing & impellers | 2900 (r/min) | 5 inch |
Post time: 2021-12-11
