Singapore customers inquired about 110kW 150 HP 1500 m3/hr 12 inch mixed flow pump
Please kindly quote us mixed flow pump as following:-
– Have ISO 9001:2015 and ISO 14001:2015 and BSOHSAS 18001:2007 certificate
– 380 V 50 Hz 3phase 1500 rpm
– Flow rate 1500 m3/hr tdh 15 m efficiency not lower than 80%
– Suction port 12 inch discharge port 12 inch
– Casing : cast iron
– Impeller:cast iron
– Shaft: stainless steel
– Wearing ring : cast iron
– Ball bearing
– Stuffing box
– Bare pump end
– Have test certificate follow to ISO 9906 or IS9137 to show flow and efficiency when quoting
– Letter show that pump will have spare parts within 5 year
– Warrantee not lower than 1 year with free parts
– 1 set
If offer complete with engine use not less than 110kW 6cylinder 4 stroke water cooled,turbo type dry air fiter, 6000 cc,continuous working not less than 150 HP at 1500rpm and have ISO 9001 . complete pump and engine with flexible coupling
– 1set
Please give details,curve,dimension and catalog of pump and pump with engine
HW model mixed flow pumps manufacturer
Our HW model mixed flow pumps are exported to many countries, and Singapore also has many of our customers, Shenlong mixed flow pumps are designed to deliver high capacity flows at low to medium heads with outstanding efficiency. These pumps generally operate in a submerged state with suction entrances flooded. Horizontal units are installed with a positive suction head. Capacities range from 500 gpm to 700,000 gpm, and bowl sizes from 3 in. to 120 in.
Radial flow pumps are in-line centrifugal pumps that operate on a horizontal plane in relation to the flow direction of the water. Axial flow pumps are the opposite—they are in-line pumps that work on a vertical plane in relation to the water. Mixed flow pumps are a cross between the two. The impeller sits within the pipe and turns, but the turning mechanism is essentially diagonal, using centrifugal force to move the water along while accelerating it further with the push from the axial direction of the impeller. This creates enough force to generate high rates of flow. Mixed flow pumps are primarily used in applications requiring a high level of flow combined with relatively low discharge pressure. There are a number of industrial applications where this type of pump can be useful.
Post time: 2022-02-18
