Overview of 4kW 80m3/h 10m head submersible non-clogging sewage pump (100wq80-10-4):
WQ type submersible non-clogging sewage pump is a new generation of pump products successfully developed on the basis of the introduction of foreign advanced technology and combined with the use characteristics of domestic water pumps. The 100wq80-10-4 submersible pump has the characteristics of remarkable energy saving effect, anti-winding, no clogging, automatic installation and automatic control, and has a unique effect in discharging solid particles and long fiber waste. The hydraulic performance of this series of sewage pumps is advanced and mature. The products have been tested by performance, and all indicators meet the relevant design requirements.
4kw 80m3/h 10m head submersible sewage pump (100wq80-10-4) using conditions:
(1) The temperature of the medium does not exceed 60℃, the weight of the medium is 11.3×103kg/m3, and the PH value is in the range of 5-9.
(2) For pumps without an internal gravity circulation cooling system, the exposed liquid level of the motor part shall not exceed 1/2.
(3) The material of the main parts of this pump is cast iron, so it cannot be used for pumping highly corrosive liquids.
(4) The volume ratio of solids in the conveying medium is below 2%.
4kw 80m3/h 10m head submersible non-clogging sewage pump (100wq80-10-4) submersible pump installation method:
A. Fixed automatic installation
The automatic coupling device system is suitable for long-term fixed use occasions, and has the advantages of fast installation, convenient detection and maintenance, etc. The system uses a special base, which is fixed at the bottom of the sump and connected with the outlet pipe. A supporting block is installed on the top of the pool, and the two are connected with a guide rod. The 100wq80-10-4 submersible pump is connected with a specific bracket. , slide down the guide rod to the base, automatically couple and seal with it, and automatically fall off when lifting.
B. Mobile Mounting System
The mobile installation is supported by a bracket, and it can work after connecting the water outlet hose. This method is mainly used for emergency or maintenance construction needs.
Post time: 2022-01-08
