11 KW Pipeline Pump

11kw pipeline pump is a series of products designed by our company according to the characteristics of single-stage single-suction pump, referring to domestic and international standards, and adopting scientific hydraulic model. Its main features are: small size, light weight, less space occupied; using two-pole motor, low power consumption, strong pumping power. Its main advantages are: perfect structure, compactness, low noise, high efficiency and energy saving, sturdy and durable, and convenient maintenance. It is mainly used to pump clean water at room temperature and liquids with physical and chemical properties similar to water. It is widely used in water supply, refrigeration, fire protection, electroplating, chemical industry, sewage treatment, and other systems, as well as machinery and equipment.

The 11kw pipeline pump is widely used in: metallurgy, chemical industry, textile, papermaking, hotels and restaurants, and other boiler hot water pressurized circulation transportation and urban heating systems. The operating temperature is T≤120℃.

11 KW Pipeline Pump

11kw pipeline pump features:

Smooth operation: The absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation without vibration.

No water leakage: Carbide seals of different materials ensure no leakage when conveying different media.

Low noise: The water pump supported by two low-noise bearings runs smoothly, except for the faint sound of the motor, basically no noise.

Low failure rate: The structure is simple and reasonable, and the key parts are matched with international first-class quality, and the trouble-free working time of the whole machine is greatly improved.

Convenient maintenance: replacement of seals and bearings is simple and convenient.

More land occupation: The outlet can be left, right and upward, which is convenient for pipeline arrangement and installation and saves space.

11kw pipeline pump model meaning:

For example: ISW80-160(I)A

ISW type horizontal pipeline centrifugal pump

ISWR type horizontal hot water pipeline centrifugal pump

ISWH-horizontal chemical pump

ISWB-horizontal pipeline oil pump

ISWD-horizontal low speed centrifugal pump

80-Nominal diameter of pump inlet and outlet (mm)

160-Nominal diameter of impeller (mm)

I-Traffic Classification

A-Impeller is cut for the first time


Post time: 2022-01-18
  • Previous:
  • Next:
  • Tags:

  • Write your message here and send it to us
    Related Posts
    • 180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump
      180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump

      650HW-10 Mixed Flow Pump Flow 4500 M3/Hr At 14 M Suction/Discharge 26 Inch Data: Type: 650HW-10 Power(KW): 180KW Speed(rpm): 590 Flow(m3/h): 4500m3/h Head(m): 14 Outlet size: 26inch Inlet size: 26inch Shaft power: 177.3 kw Efficiency: 88% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

    • 75KW 1500 M3/Hr 16 Inch 400HW-7 Mixed Flow Pump
      75KW 1500 M3/Hr 16 Inch 400HW-7 Mixed Flow Pump

      400HW-7 Mixed Flow Pump Flow 1500 M3/Hr At 14 M Suction/Discharge 16 Inch Data: Type: 400HW-7 Power(KW): 75KW Speed(rpm): 980 Flow(m3/h): 1500m3/h Head(m): 14 Outlet size: 16inch Inlet size: 16inch Shaft power: 66.3 kw Efficiency: 84% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

    • 37KW 1000 M3/Hr 12 Inch 300HW-8 Mixed Flow Pump
      37KW 1000 M3/Hr 12 Inch 300HW-8 Mixed Flow Pump

      300HW-12 Mixed Flow Pump Flow 1000 M3/Hr At 12 M Suction/Discharge 12 Inch Data: Type: 300HW-8 Power(KW): 37KW Speed(rpm): 970 Flow(m3/h): 1000m3/h Head(m): 12 Outlet size: 12inch Inlet size: 12inch Shaft power: 31.72 kw Efficiency: 85% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

    • 355KW Horizontal Centrifugal Pump Used In Sewage Of Dry-dock
      355KW Horizontal Centrifugal Pump Used In Sewage Of Dry-dock

      355kw horizontal centrifugal pump used in sewage of dry-dock data fluid: salt water motor: 380 v – 50 hz flow: 4379 m3/h, max. manometric height: 25 m suction height: 5/7 m body material: cast iron impeller material: stainless steel 316 place of work: sewage of dry-dock We offer for centrifugal pumps and submersible pump for …

    • 30KW 40HP 160M3/H Pump For Construction Of Sewage Station
      30KW 40HP 160M3/H Pump For Construction Of Sewage Station

      Construction Of Sewage Station A sewage system is made up of a network of pipes that carry sewage from home and businesses to the main sewers. Ordinarily, the network of pipes relies on gravity for the waste to flow into the main sewer. However, in low-lying areas where the main sewer sits on higher ground …

    • 160KW 220HP 20M3/H Multistage Centrifugal Pump
      160KW 220HP 20M3/H Multistage Centrifugal Pump

      160KW 220HP 20M3/H Multistage Centrifugal Pump Introduction The 160 KW 220HP Horizontal Multistage Water Pump is horizontal multistage centrifugal pump. This Electric Multistage Pump has developed successfully based on introduction, digestion and absorption of advanced technologies. The products not only possesses the high efficiency, good cavitation performance but also operates smoothly and reliably. Flow passage …

    • 15KW Single Stage Single Suction Centrifugal Pump
      15KW Single Stage Single Suction Centrifugal Pump

      15KW Single Stage Single Suction Centrifugal Pump Introduction Single stage single suction centrifugal pump suitable for pumping clean water or liquids which chemical and physical property is similar to water. So single suction centrifugal pump is widely used in water transport, water supply and distribution, irrigation, drainage and flood control, district cooling/heating and fire fighting. …

    • 37KW 50HP 72 M3/H Vertical Pump
      37KW 50HP 72 M3/H Vertical Pump

      37KW 50HP 72 M3/H Vertical Pump Introduction The 37kw vertical multistage centrifugal pump is made up of a motor and a pump. The pump shaft and the motor shaft are coupled by a shell-type coupling to ensure that the pump and the motor are absolutely coaxial, so that the pump runs smoothly and the noise …

    • 22KW 30HP 90M3/H 60M Head Deep Well Submersible Pump
      22KW 30HP 90M3/H 60M Head Deep Well Submersible Pump

      22KW 30HP Submersible borehole pump, suitable for pumping clean water. This pump carries drinking water approval. The pump is fitted with a 22 kW motor with sand shield, mechanical shaft seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. Suitable …

    • 90KW 120HP 100M3/H Stainless Steel Material Submersible Pump
      90KW 120HP 100M3/H Stainless Steel Material Submersible Pump

      Since its foundation in 1980s in China, Shenlong has been engaged in the manufacture, supply and sales of pumps and related equipment, with submersible pumps being key products. As well as producing general drainage pumps, Shenlong puts great effort into applications for difficult-to-handle liquids, such as corrosive and high temperature liquids and seawater. 90kw 100m3/hr …